Always a Step Ahead of Water Problems
Monitor water levels in wells, reservoirs, and flood-prone areas. Get real-time alerts and prevent water-related disasters before they happen.
Where it’s deployed
Smart Water Level Monitoring
Traditional water monitoring requires manual checks at inconvenient times. IoT-based sensors change that. Get continuous data on water levels from wells, reservoirs, and flood zones. Identify problems early. Protect against outages and flooding. Access data from anywhere, anytime.
Well Water Monitoring
Track Groundwater Levels
Monitor well water levels and pump performance. Know when water is available. Prevent pump dry runs and equipment damage.
What we measure
- Submersible Sensor
- Water Level
- Pump Status
- Alerts
Typical hardware
Hardware-agnostic — chosen for each site
Ultrasonic level sensor
Rivers, culverts and flood points
Level transmitter
Process and storage tanks
Current meter
Pumps, motors and panels
I/O controller
Pumps, valves and relays
Outdoor LoRaWAN gateway
Masts and rooftops, IP67
How it works
From a sensor in the field to the screen your operations team uses.
One accountable team for the sensors, the LoRaWAN network and the software — integrated with the systems you already run.
01 · Sense
Sensors in the field
Battery-powered LoRaWAN sensors on rivers, buildings, tanks and streets — chosen for each reading.
02 · Connect
LoRaWAN and cellular
LoRaWAN gateways for battery sensors and wide sites, IoT SIMs for devices that move or send more data — chosen per device.
03 · Process
EdgeKinect Core
Runs on the site gateway: every reading decoded, normalized and routed to the systems that need it.
04 · Act
Your dashboards & systems
Dashboards, rules and alerts in EdgeKinect Vision — our cloud or self-hosted — and the same data in SCADA, historians or the cloud.
The challenge
What makes water hard to watch.
- 01
How do I monitor water levels continuously?
Submersible sensors measure water levels by calculating pressure exerted by liquid above. Data transmits wirelessly via LoRaWAN to cloud dashboards accessible from anywhere.
- 02
Can sensors work in remote locations?
Yes. LoRaWAN reaches remote sites that cellular often can't. Battery-powered with years-long life. No wired infrastructure needed.
- 03
How do I get flood warnings in time?
Set threshold alerts for any water level. When levels exceed limits, receive instant notifications via SMS, email, or app. React before flooding occurs.
- 04
What about harsh environments?
Sensors are IP66-IP68 rated. Designed for submersion in ground, surface, waste, and sea water. Built for the toughest conditions.
- 05
How accurate are the measurements?
Pressure-based sensors provide precise readings. Choose from 3M, 5M, or 10M measurement ranges based on your needs. Specific gravity calculations ensure accuracy.
- 06
Is installation difficult?
No. NFC configuration makes setup simple. Power on with phone or computer. Start reading data on cloud dashboards within minutes.
The outcome
What changes once it’s running.
- 01
Low Cost & Low Power
Battery-powered sensors last for years. High IP rating enclosure reduces maintenance. Better economics with less human effort.
- 02
Easy Installation
NFC configuration for quick setup. Works in harsh environments where wired tech cannot reach.
- 03
Real-Time Alerts
Automated notifications for critical water level changes. Enable proactive flood prevention.
- 04
Remote Monitoring
Access water level data from anywhere through cloud platforms and mobile apps. No site visits needed for routine checks.
- 05
Custom Measurement Ranges
Choose from 3M, 5M, or 10M sensor ranges. Match your specific application requirements.
See it running
EdgeKinect Vision for Water Monitoring
View all water levels from a single dashboard. Set alerts for any location. Track historical trends. Access data from any device, anywhere.
Sensors & gateways
The LoRaWAN hardware behind flood detection & water monitoring.
We're hardware-agnostic: each site gets the sensors that suit its readings and environment, from several manufacturers, on one network.
Ultrasonic level sensor
Rivers, culverts and flood points
Level transmitter
Process and storage tanks
Current meter
Pumps, motors and panels
I/O controller
Pumps, valves and relays
Weather station
Wind, rain, temperature
Tilt sensor
Gates, poles and manhole covers
Tank level sensor
Oil, fuel and water tanks
Pressure transducer
Pipelines and wellheads
Outdoor LoRaWAN gateway
Masts and rooftops, IP67
Macro LoRaWAN gateway
Towers and rooftops, city-wide coverage
Industrial gateway
Substations and plant networks
FAQ
Questions about flood detection & water monitoring, answered.
What buyers ask us most about sensors, coverage and integration.
Ultrasonic sensors above rivers, culverts and drains measure the water level on a schedule and report faster as levels rise. When a threshold is crossed, the people on call get an SMS, email or phone alert, and the data is kept for reporting.
More solutions
Built on the same platform.
Talk to us
Plan your water monitoring network.
Tell us which rivers, wells or reservoirs you need to watch. A LoRaWAN and IoT specialist will map the sensors and early-warning alerts with you.
- Sales
- (778) 900-5895
- [email protected]
- Hours
- Mon–Fri, 08:30 AM – 04:30 PM PST